Kenwood TK-390 Скачать руководство пользователя | Manualshive

Страница: 6 / 64

background image

6

TK-390

3-15. Mode (Enable/Disable)

The transceiver has many special modes mainly for main-

tenance.

· Self Programming mode
· Panel Test mode
· Clone mode
· Firmware Programming mode
· Version info.
It is possible to set enable/disable for each mode. We

recommend to set these mode to Disable after set up to
save contents.

3-16. ID

The transceiver is capable to have ID. The format is

DTMF, MSK or ANI board (if installed). The timing that the
transceiver sends ID is programmable.

Connect ID : Connect ID is send on beginning of trans-
mission.
Disconnect ID : Disconnect ID is send on end of trans-
mission.
Both : Connect ID is send on beginning of transmission
and disconnect ID is send on end of transmission.
Off : Sending ID function is disabled.
There is also “PTT ID” setting for each channel. Refer

“PTT ID” of channel feature.

When you use an ID code for ANI board, the ID code and

transmitting timing are configured to the optional ANI board.

3-17. OST (Operator Selectable Tone)

The transceiver is capable to have “OST” function and

16 tone pair (QT/DQT) with max 7-digit name for each tone
pair.

• “OST” Back Up

The transceiver is programmable the selected “OST”

code is memorized or not. If you set to Disable (no memo-
rized), the “OST” function always starts at “off”.

• Direct “OST”

It is possible to call “OST” number directory using key-

pad. In this case, keypad is used for “OST”, then “DTMF
Auto PTT”, “DTMF Auto Dial” functions by keypad are not
usable.

3-18. Emergency
• Active Time

Automatic transmission period in the emergency mode.

• Interval Time

Interval time between the automatic transmissions.

• Duration of Locator Tone 1

Duration of an alert tone before the automatic transmis-

sion is performed.

• Duration of Locator Tone 2

Duration of an alert tone after the automatic transmission

is performed.

• Man Down Delay Time

Delay time of entering the emergency mode when the

internal Man Down port becomes active.

• Man Down Pre-alert

Wait time of the alert tone when the internal Man Down

port becomes active to enter the emergency mode. (After
an alarm sounds, the transceiver waits for the programmed
wait time then enter the emergency mode.)

• Emergency Channel Display

Setting for the display in the emergency mode.
The transceiver can be programmed to display “EMER-

GENCY” channel name when it is in emergency mode.

If you set to “off” by KPG-38D the transceiver shows se-

lected group/channel/status before entering to the emer-
gency mode however the transceiver is in an emergency
mode.

• Emergency Mode Type

Speaker mute on or off in the emergency mode.

• Emergency Type

Select an Emergency code format from DTMF, MSK, ANI

board or OFF (Disabled).

• Emergency DTMF ID

The Fleet number when you select DTMF in the emer-

gency type.

• Emergency Call Fleet

The emergency fleet number when you select MSK in

the emergency type.

• Emergency Call ID

The emergency DTMF ID code when you select MSK in

the above emergency type.

3-19. Radio Password (Keypad Model Only)

The radio password prevent unauthorized users opera-

tion. Every time the power on, transceiver is locked and
unusable until entering correct password.

Enter pre-programmed password by FPU and [#] key

causes the transceiver unlocked.

3-20. Data Password

The data password prevents unauthorized reading of the

programmed transceiver data by FPU. Enter pre-pro-
grammed password in FPU reading process. This password
also protects the clone.

Enter pre-programmed password by FPU and [#] key to

clone.

OPERATING FEATURES

«
...
4
5
6
7
8
...
»

Содержание TK-390

































































Отзывы:

Нет отзывов

Похожие инструкции для TK-390

Бренд: Canon Страницы: 58

Бренд: Daspi Страницы: 2

Бренд: M-system Страницы: 4

Бренд: Offshore Страницы: 14

Бренд: Sangean Страницы: 1

Бренд: Xoro Страницы: 10

Бренд: Yaesu Страницы: 15

Бренд: Caen ELS Страницы: 26

Бренд: Yamaha Страницы: 4

Бренд: ABBA Страницы: 8

Бренд: Grundig Страницы: 25

Freeview TRF-7150

Бренд: Topfield Страницы: 78

SG Security Communications MLR2-DG

Бренд: Sur-Gard Страницы: 60

Бренд: Teac Страницы: 40

Бренд: CAME Страницы: 8

Бренд: HBM Страницы: 16

Бренд: Polar Electro Страницы: 7

Бренд: Intel Страницы: 80

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды