Kenwood 717202300000, Руководство по эксплуатации

Страница: 104 / 108

Operating Instructions
Adding detergents
• Put detergent in correct compartment ensure you use the correct dosage
I = Prewash II = Mainwash III = Fabric conditioner
• Push in the detergent drawer
Prepare for washing
• Open cold water tap fully; Check the drain hose; Turn on main switch
• Open front loading door (see “end of programme”) - Put in your laundry - Close front loading door
firmly
• Turn programme selector to “

” position
• Wait, until “ 00 “ stops flashing on the digital display unit; Select the programme of your choice
Programme selection
Whites and colour fast cottons • P1 30 - 95°C
• Select spin speed
• Choose temperature (see HLCC care labelling guide) using programme selector in area P1
• If desired, select additional functions (see p. 88 - 89)
Non colour fast and delicates • P2 • up to 60°C
• Select spin speed
• Choose temperature (see HLCC care labelling guide) using programme selector in area P2
• For the delicates programme select press button (higher water level)
• If desired, select additional functions (see p. 88 - 89)
Hand wash programme • P3 • cold (pre-set)
• Max spin speed is automatically reduced to 500 rpm
• Using programme selector in area P3
• If desired, select additional functions (see p. 88 - 89)
Woollens • P4 • up to 40°C
• Max spin speed is automatically reduced to 500 rpm
• Choose temperature (see HLCC care labelling guide) using programme selector in area P4
• If desired, select additional functions (see p. 88 - 89)
Silk wash programme • P5 • 30°C (pre-set)
• Max spin speed is automatically reduced to 500 rpm
• Using programme selector in area P5
• If desired, select additional functions (see p. 88 - 89)
Quick wash programme • P6 • cold (pre-set)
• Max spin speed is automatically reduced to 500 rpm
• Using programme selector in area P6
• If desired select additional functions (see p. 88 - 89)
Approx. 15 sec. will elapse from selecting a programme until the machine starts to wash. A red
light is now visible above the „

“symbol, and the selected programme and temperature are
indicated on the digital display.
End of programme
• Turn programme selector to “

“ position
• Wait, until “ 00 “ stops flashing on the digital display unit
• Turn the programme selector to “ “ symbol
• Take out your laundry; Turn off main switch; Close the cold water tap