KENT 92804 Скачать руководство пользователя | Manualshive

Страница: 22 / 60

background image

20

DISC BRAKES
We suggest that if your bike comes equipped with a disc brake that you

consult a professional bicycle mechanic for any adjustments or repair

needed for this brake.
SAFETY PRECAUTIONS
1. Adjust the inner cable so that the protruding length is less than 20mm.

If the protruding length is any longer, the end of the cable may become

stuck in the rotor, which could cause the wheel to lock and the bicycle

could fall forward causing injuries.
2. The calipers and rotor will become hot when the brakes are operated,

so do not touch them while riding or immediately after dismounting from

the bicycle, you may get burned. Check that the brake components have

cooled down before attempting to adjust the brakes.
3. Always make sure that the front and rear brakes are working correctly

before you ride the bicycle.
4. Before riding the bicycle, check that the pad thicknesses are 0.5mm or more.
5. If noise occurs when the brakes are operated, it may indicate that the

brake pads have worn down to their usage limit. After checking that the

brake system has cooled down sufficiently, check the brake pad thickness.

Replace the brake pads if the wear indicators are visible.
6. Be careful not to allow any oil or grease to get onto the rotor and brake

pads, otherwise the brakes may not work correctly.
7. Check the brake cable for rust and fraying, and replace the cable

immediately if such problems are found. If this is not done, the brakes

may not work correctly.
8. The required braking distance will be longer during wet weather. Reduce your speed and

apply the brakes early and gently.
9. If the road surface is wet, the tires will skid more easily. If the tires skid, you may lose

control of the bicycle. To avoid this, reduce your speed and apply the brakes gently.
10. Check that the quick release lever is on the right side (the opposite side to the rotor). If

the quick release lever is on the same side as the rotor, there is a danger that the lever may

interfere with the rotor causing a sudden stop, whcih may result in a serious accident. Make

sure that it does not interfere by rotating the wheel and making sure it rotates freely. Make

sure wheel is securely tightened to forks.

ASSEMBLING YOUR BIKE

«
...
20
21
22
23
24
...
»

Содержание 92804





























































Отзывы:

Нет отзывов

Похожие инструкции для 92804

Бренд: GLOBAL FITNESS & LEISURE Страницы: 18

Indoor Cycle Computer

Бренд: Waters Fitness Страницы: 8

Sorbus City SUV

Бренд: WALDBIKE Страницы: 32

Бренд: FABRICBIKE Страницы: 32

E-Moon Trek 28 Series

Бренд: F.lli Schiano Страницы: 129

Бренд: Yedoo Страницы: 37

Бренд: Bike Friday Страницы: 8

Mid-drive e-assist

Бренд: Bike Friday Страницы: 10

Бренд: BIKE AHEAD COMPOSITES Страницы: 10

Бренд: cyclekids Страницы: 32

Бренд: Crivit Страницы: 79

E-HYBRIDE Andasol 4 Man / Lady

Бренд: GHOST EPAC Страницы: 180

Бренд: KMX Karts Страницы: 15

Бренд: YT Industries Страницы: 31

TOURNADO - 2008

Бренд: DAHON Страницы: 2

Бренд: rad3 Страницы: 24

Бренд: Retrospec Страницы: 3

Бренд: Bakcou Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды