KENT 92804 Скачать руководство пользователя

Страница: 4 / 60

Congratulations on the purchase of your new bike! With proper assembly and maintenance it will

offer you years of enjoyable riding!

IMPORTANT: Carefully read and follow this manual (and any other materials included with this bike)

before riding. Please retain this manual for future use. If this bike was purchased for a child, it is the

responsibility of the purchaser to verify the bike has been properly assembled, and that the user has

been properly trained and instructed in use of the bike.

This manual is provided to assist you and is not intended to be a comprehensive manual covering all

aspects of maintaining and repairing your bicycle. The bicycle you have purchased is a complex piece of

equipment that must be properly assembled and maintained in order to be ridden safely. If you have any

doubts about the assembly or your ability to properly assemble and maintain the bicycle. You must

have it assembled and maintained by a professional bicycle mechanic.

WARNING: Electric bikes are fun to ride but can be dangerous to use. The user or consumer assumes

all risk of personal injuries, damage, or failure of the bicycle or system and all other losses or

damages to themselves and others and to any property arising as a result of using the bicycle.

DO NOT DISASSEMBLE, MODIFY OR REPLACE ELECTRICAL PARTS.

If you need to change any parts, please consult a professional

bicycle mechanic or conact customer service for additional help.

NOTE: YOUR INSURANCE POLICIES MAY NOT PROVIDE COVERAGE FOR ACCIDENTS INVOLVING

THE USE OF THIS BICYCLE. TO DETERMINE IF COVERAGE IS PROVIDED YOU SHOULD CONTACT

YOUR INSURANCE COMPANY OR AGENT.

DANGER! Failure to properly assemble and maintain your bicycle could result in serious

injury or death to the rider.
This manual contains important safety, performance and service information. The

purpose of this Owner’s Manual is to help you use your bike safely in the manner it is

intended and allow you to enjoy the benefits it offers for many years to come. Please read

it before you take the first ride on your new bicycle, and keep it for reference.
If you have any questions or do not understand something, take responsibility for your

safety and contact Kent customer service at 1-800-451-KENT (5368).

ALWAYS WEAR A PROPERLY FITTED HELMET WHEN YOU RIDE YOUR

BICYCLE. DO NOT RIDE AT NIGHT. AVOID RIDING IN WET CONDITIONS.

PREFACE

Содержание 92804





























































Результаты поиска

Содержание 92804

Отзывы:

Похожие инструкции для 92804

Бренды по названию

Популярные бренды

KENT 92804, Руководство пользователя

Результаты поиска

Содержание 92804

Отзывы:

Похожие инструкции для 92804

Бренды по названию

Популярные бренды