KENT 92804 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 60

KENT 92804 Скачать руководство пользователя страница 45

43

PEDAL INSPECTION: Pedals should be inspected every month, taking note of the following

areas:

– Check that the pedals are tightened securely against the crank arm. If pedals are

allowed to become loose, they will not only be dangerous to the rider but will also cause

irreparable damage to the mating threads of the cranks.

– Check that pedal bearings are properly functioning. Move the pedals up and down, and

right to left, and also rotate them by hand. If you detect any looseness or roughness in

the pedal bearings then lubrication or replacement is required. Check your pedals to see

if adjustment is possible to correct the looseness.

– Ensure that the front and rear pedal reflectors on each pedal are clean, not cracked, and

securely fitted.

WARNING! Never ride with loose pedals. Improperly installed or tightened pedals

can work loose, damaging the bicycle and causing possible serious injurty or

death to the rider.

Always wear solid, well-constructed shoes while riding.

MAINTENANCE/REPAIR

CAUTION: CALL CUSTOMER SERVICE AT 800-451-KENT OR

CONSULT A PROFESSIONAL BICYCLE MECHANIC WITH ANY

QUESTIONS ON REPAIRS OR MAINTENANCE.

«
...
43
44
45
46
47
...
»

Содержание 92804





























































Отзывы:

Нет отзывов