18
A-HEAD STEM ASSEMBLY
WARNING! ALWAYS TIGHTEN
FASTENERS TO THE CORRECT
TORQUE. BOLTS THAT ARE TOO
TIGHT CAN DEFORM. BOLTS THAT
ARE TOO LOOSE CAN MOVE AND
FATIGUE. EITHER MISTAKE CAN
LEAD TO LOSS OF CONTROL,
SERIOUS INJURY OR DEATH. IF YOU
DO NOT FEEL COMFORTABLE WITH
YOUR SKILLS IN ASSEMBLING OR
ADJUSTING THE BIKE, PLEASE TAKE
IT TO A PROFESSIONAL BIKE MECHANIC.
1. Make sure the front fork is facing forward
(see illustration).
2. Insert the stem onto the fork steerer tube.
Align the steerer tube so that it sits ABOVE
the top allen screw, but BELOW the top of
the stem.
3. Tighten the 5mm head set top cap bolt to
a torque of 15 ft. lbs. Do Not Overtighten!
4. Face the handlebar stem forward directly
in line with the front wheel. Tighten the two
5mm allen screws on the handlebar stem to
a torque of 7 ft. lbs.
ASSEMBLING YOUR BIKE
Fork Steerer tube
should be aligned above
the top allen screw
but below the top
of the stem
Содержание 92804
Страница 60: ...58 04 19 ...