KENT 92804 Скачать руководство пользователя

Страница: 2 / 60

Motorized bicycles are new to most riders so in the interest of safe cycling make sure you

read, understand, and follow the instructions in this manual.
This manual contains important safety, signal words such as DANGER, WARNING,

CAUTION, IMPORTANT, and NOTE or NOTICE. These are important signal words telling

you to pay special attention to that text as rider safety is involved.

This symbol will appear in areas of critical rider safety.
DANGER and WARNING: Pay special attention to these since failure to do so could

result in serious injury or death to the rider or others.
CAUTION: If not followed these instructions could result in injury or mechanical failure or

damage to the bicycle.
NOTE or NOTICE or IMPORTANT: These specify something that is of special interest. Read

and pay close attention as your safety and that of your bicycle are involved.

IMPORTANT: Read the BEFORE RIDING section and check that all parts are installed and

working as per this manual. If you understand how the bicycle operates, you will get the

best performance. When you read this manual, compare the illustrations to the bicycle.

Learn the location of all the controls and parts as well as how they work. KEEP THIS BOOK

FOR FUTURE REFERENCE.
CAUTION Before you ride the bicycle, check the brakes and other parts of the bike. Make

sure all parts are assembled correctly, securely tightened and working properly. Take your

first ride in a large, open, level area away from traffic. If you have a problem, call customer

service at 800-451-KENT (5368).

Check and read this decal on

your bicycle before each ride:

Содержание 92804





























































Результаты поиска

Содержание 92804

Отзывы:

Похожие инструкции для 92804

Бренды по названию

Популярные бренды

KENT 92804, Руководство пользователя

Результаты поиска

Содержание 92804

Отзывы:

Похожие инструкции для 92804

Бренды по названию

Популярные бренды