Page 1 from
24
Instructions rad3_bullitt_kids_box_2022 09
12
rad3 BULLITT Base Box / Kids Box / Tarpaulin / Canopy
Congratulations on your
purchase decision and have
fun on your venture!
Enclosed are some instructions
for the use, assembly and care
of the box.
We have tried to keep the total weight as low as possible during the construction. Nevertheless,
you should work in pairs if necessary during assembly and observe the usual rules for handling
heavy and bulky objects - for the sake of your health.
The box is adapted for the Bullitt type cargo bikes and tested with the 2013 and 2015 frames - also
with STePS drive, in today's version 2 also for the larger tolerances especially with the E8000. The
Canopy does NOT fit on the E8000, as a wider handlebar is installed here (shortening possible at
your own responsibility).
At the front, at the bottom and at the back, the panels are attached to the existing mounting
brackets on the frame.
NOTE: Unfortunately, the tolerance of the frames is sometimes VERY large, you may have to
widen our holes. We ask for your understanding.
The box itself is a kit made of 5 panels:
1x front, 1x base, 1x back, 2x sides and in the standard version 1x backrest with foam.
rad3 accepts no liability for faults and consequential faults resulting from assembly and use
deviating from the intended area of use. This also applies to own attachments and modifications
to the box.
We create step by step video tutorials - please have a look at
You will need some manual dexterity and the following tools for assembly:
Allen key 4 / 5 / 6 mm Open-
ended / ring spanner 10 mm
for tarpaulin and canopy
(Rechargeable) drill 1.5
mm drill bit
Cross-recess screwdriver PZ2 Ruler
Pin / Scriber
Some of the photos still show pre-series types. Don't let this irritate you - the technology is the
same - we will update this.
Subscribe to DeepL Pro to translate larger documents.
Visit
for more information.
