16
Oven Controls
1. Bake
- Use to start a normal Bake function.
2. Broil
- Use to select Broil function.
3. Convec Bake
- Use to select the Convection Bake function.
4. Convec Convert
- Use to select the Convection Convert
function.
5. Convec Roast
- Use to select Convection Roast function.
6. Slow Cook
- Use to select Slow Cook function.
7. Warmer Drawer (some models)
- Use to select Warmer
Drawer function.
8. Warm & Hold
- Use to keep cooked food warm and at
serving temperature for up to 3 hours.
9. START
- Use to start oven functions.
10. Up / Down
arrows - Use with the function keys to adjust set-
tings and adjust temperature and times.
11. STOP
- Use to cancel any oven function previously entered
except clock and timer.
12. 0-9 keypad
- Use to enter oven temperatures and times.
13. Timer ON/Off
- Use to set and cancel the timer.
14. Add 1 Minute
- Use to add one minute to the timer. This
works with the kitchen timer and does not affect any cook
time or start time functions.
15. Cook Time
- Use to set a specific amount of time needed
for cooking. Automatically cancels cooking process at end
of set time.
16. Delay Start
- Use with Bake, Convection Bake, Convection
Convert, and Self Clean functions to program a delayed
start time.
17. Self Clean
- Use to select 2, 3, or 4 hr Self-Clean cycle.
18. Oven Lock
-
Use to lock oven door and oven functions
.
19. LIGHT
- Use to turn internal oven light on and off.
20. CLOCK
- Use to set time of day.
Important note:
The oven control works with both the numeric keypad and the
Up / Down arrow keys. For cooking functions (Bake, Broil,
Convec Bake, Convec Convert, Convec Roast, and Slow Cook) as
well as for the Timer ON/OFF and the CLOCK functions, you
may press the Up / Down arrows to adjust the temperature in
addition to (or instead of) using the digital keys. Regardless of
the method you choose, always press the START key to initiate
the function.
Please be aware that the Up / Down arrows will not operate
with the following functions: Warmer Drawer, Add 1 Minute, and
Warm & Hold. If an arrow key is pressed in an attempt to
program any given function that is invalid, the control will sound
a triple beep.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Содержание 790.9507 Series
Страница 42: ...42 Before You Call ...
Страница 43: ......