Kenmore 790.9507 Series, Инструкция по использованию и уходу

Страница: 23 / 43

23
Oven Controls
Setting Convection Roast
The Convection Roast function combines a cook cycle with the
convection fan to roast meats and poultry. Meats cooked using
the Convection Roast function will be juicier, and poultry will be
crisp on the outside while staying tender and moist on the inside.
Convection Roast may be set for any oven temperature between
170°F (77°C) and 500°F (260°C).
Suggestions for Convection Roast:
• Preheating is not necessary when roasting foods using
Convection Roast. Since Convection Roast cooks food faster,
reduce the cook time by 25% from the recommended cook
time of your recipe. If necessary, increase cooking time until
the desired doneness is obtained.
• The broiler pan will catch grease drippings, and the grid
will help prevent splatters. The roasting rack will hold the
meat. Use the offset rack on rack position 1.
• Do not cover foods when dry roasting because this will
prevent the meat from browning properly.
To set Convection Roast with a default oven set temperature of
350°F:
1. Press Convec Roast.
2. Press .
To cancel Convection Roast at any time, press .
Important note:
• If the oven door is opened when any convection function is
active, the convection fan will stop rotating until the oven
door is closed.
• It is not recommended to roast chicken on a roasting rack.
Use a deep pan instead.
Setting Convection Convert
Pressing the Convection Convert key automatically converts the
cooking temperature entered for any standard baking recipe to
the lower temperature required for convection baking.
When Convection Convert is used with a timed Convection Bake
setting of 20 minutes or more, the Convection Convert function
will display a
CF message as a reminder to check food when the
bake time is 75% complete (See Figure 30 ). At this time the oven
control will sound one long beep at regular intervals until the set
cook time has finished.
To add Convection Convert to Convection Bake function using
default oven set temperature of 350°F:
1. Press Convec Bake .
2. Press Convec Convert.
To cancel Convection Convert at any time, press .
To program oven for Convection Convert with oven default
temperature of 350°F and to shut-off after 30 minutes:
1. Press Convec Bake.
2. Press .
3. Press Cook Time.
4. Enter 3 0 using numeric keypad or press the Up arrow key
until 3 0 appears in the display.
5. Press .
6. Press Convec Convert.
To cancel Convection Convert at any time, press .
To program oven for Convection Convert with recipe tempera-
ture of 425°F and to shut-off after 30 minutes:
1. Press Convec Bake.
2. Enter 4 2 5 using numeric keypad or press the Up arrow key
until 4 2 5 appears in the display.
3. Press .
4. Press Cook Time.
5. Enter 3 0 using numeric keypad or press the Up arrow key
until 3 0 appears in the display.
6. Press .
7. Press Convec Convert. Set bake temperature will convert to
a lower temperature and begin baking process.
To cancel Convection Convert at any time, press .
Important note:
• Convection Convert may only be used with the Convection
Bake function and with a minimum of 20 minutes cook time.
• When using Convection Convert feature, Cook Time reduc-
tions may vary depending on the oven set temperature.
• The convection fan will begin rotating once Convection
Bake, Convection Roast, or Convection Convert has been
activated.
• If the oven door is opened when any convection function is
active, the convection fan will stop rotating until the oven
door is closed.
Figure 30: Check Food reminder shown in display.