36
Care & Cleaning
Do not use the following on the cooktop:
•
Do not use abrasive cleaners and scouring pads, such as
metal and some nylon pads. They may scratch the cooktop,
making it more difficult to clean.
•
Do not use harsh cleaners, such as chlorine bleach,
ammonia or oven cleaners, as they may etch or discolor the
cooktop.
•
Do not use dirty sponges, cloths or paper towels, as they
can leave soil or lint on the cooktop which can burn and
cause discoloration.
Important note:
Damage to the ceramic glass cooktop may occur if you use an
abrasive type cleaning pad. Only use cleaning products that
have been specifically designed for ceramic glass cooktops.
General Cleaning
Refer to
Table 5
for more detailed information about cleaning
specific parts of the range.
Before manually cleaning any part of the
range, be sure all controls are turned off and the range is cool.
The range may be hot and can cause burns.
Ammonia must be rinsed before operating the
oven. Provide adequate ventilation.
Aluminum foil and utensils
Never cover any slots, holes, or passages in the
oven bottom or cover an entire oven rack with materials such as
aluminum foil. Aluminum foil linings may trap heat, causing a
fire hazard.
Protective Liners — Do not use aluminum foil to
line the oven bottom. Only use aluminum foil as recommended
in this manual. Improper installation of these liners may result in
risk of electric shock, or fire.
•
Aluminum foil - Use of aluminum foil on a hot cooktop can
damage the cooktop. Do not use thin aluminum cooking
utensils or allow aluminum foil to touch the surface elements
under any circumstances.
•
Aluminum utensils - The melting point of aluminum is much
lower than that of other metals. Care must be taken when
aluminum pots or pans are used on the cooktop. If
aluminum pans are allowed to boil dry when using the
cooktop, not only will the utensil be damaged or destroyed,
but it may fuse to, break, or mark the ceramic glass surface,
permanently damaging the cooktop surface.
Replacing Oven Light (some models)
To replace the interior oven light bulb:
The interior oven light bulb is located at the rear oven cavity
and is covered with a glass shield. The glass shield must be in
place whenever the oven is in use (See
Figure 48
).
Be sure the range is unplugged and all parts
are cool before replacing oven light. Wear a leather-faced
glove for protection against possible broken glass.
1.
Turn electrical power off at the main source or unplug the
appliance.
2. Remove interior oven light shield.
3. Replace bulb with a new T-4 type 40 Watt Halogen
appliance bulb. Please note: do not allow your fingers to
touch the new bulb when replacing. This will shorten the life
of the new bulb. Use a paper towel to cover the new bulb
when installing.
4. Replace glass interior oven light shield.
5. Turn power back on again at the main source (or plug the
appliance back in).
6. Be sure to reset the time of day on the clock.
Figure 47: Cleaning products to avoid
Figure 48: Replacing the oven light
glass shield
oven interior
light bulb
rear oven
cavity
Содержание 790.9507 Series
Страница 42: ...42 Before You Call ...
Страница 43: ......
