Kemper 686 02 005, Инструкция по установке и эксплуатации

Страница: 31 / 50

Manual KHS Mini System Control MASTER 28
8.1.4.4 Operating modes
In the "Operating modes" submenu, the individual KHS Mini System Control programs
and times are added through lines.
Illustration 8.30 shows an overview of the "Operating modes" shows. Press the "
↑
" and
"
↓
" buttons and confirm with "OK" to select the desired control. Subsequently use "OK" to
select a line; each line can describe one program. A selection then opens to choose which
programs will be selected. Press "OK" again to open the specific setting facilities,
depending on the program. They are explained in detail based on the sample project.
Device selection Choose line Choose program
Ill. 8.30 Overview of the "Operating modes" submenu
Note:
If the program switch is "Activated" (see Chapter
8.1.4.6), a query is presented during the
operating modes configuration to determine the
program this applies to (see Ill. 8.31). The two
mentioned flushing programs can be switched
using an external manual switch. The electrical
connection is shown in Chapter 6.2.2.5.
…..
…..
…..
…..
Ill.8.31 Program
switching
…..
03
04
…..
…..