Kemper 686 02 005, Инструкция по установке и эксплуатации

Страница: 13 / 50

Manual KHS Mini System Control MASTER 10
6.2.2.3
Connection of KHS Isolating valve with spring reset servo-drive
(Figure 686 05 / 686 15 / 696 05)
BN = brown = 1
BU = blue = 3
Ill. 6.5: Schematic representation of the connection of the KHS Isolating valve with
spring reset servo-drive
6.2.2.4 CAN bus connection
Attention:
Follow the notices and instructions in
Chapter 5. The twisted pair of the CAN
bus cable should be separated and the
shielding removed only as far as
necessary to assign the maximum
terminals (recommendation: max. 4cm).
The shielding must be properly bundled
with a heat shrink tube or insulating tape
to prevent contact of the individual wires
of the shielding to the other potentials.
Ill. 6.6: Schematic diagram of the twisted pair