Kemper 686 02 005, Инструкция по установке и эксплуатации

Страница: 21 / 50

Manual KHS Mini System Control MASTER 18
8.1.2 General plan
The following illustrations explain the "General plan" menu interface of the KHS Mini
System Control -MASTER-. The illustrations show the "General plan" based on an
exemplary configuration of a system with one KHS Mini System Control -MASTER- and
two KHS Mini System Controls -SLAVE-.
Ill. 8.3 General plan 1/8
Ill. 8.4 General plan 2/8
Changes from "General plan" into "Detailed overview"
*: A frame appears around the entry of the first
controller (see Ill 8.5 upper left) on the selected
sheet (1 to 8). Pressing the OK button again
opens the "Detailed overview" (see Ill. 8.6) of
the selected control. Optionally, press the
↑
or
↓
button to select another active controller. It is
indicated again through a flashing frame. If you
now press the OK button, the detailed overview
of another controller appears.
Legend symbols
Water exchange activated: Valve symbol is framed
Time control -> Time symbol flashes
Volume control -> Volume symbol flashes
Temperature control -> Temperature symbol flashes
Sheet 1 of 8
Master
CAN-BUS activated
Slave
Time (changes with date)
Temperature sensor applied
Empty slave slots (up to
62 system controls -
SLAVE- possible)
Sheet 2 of 8 Time (changes with date)
"Scroll back/forwards"
changes between Sheets 1 to 8
1x "OK" Selects control (frame*)
2x "OK" Changes into detailed
overview
Ill. 8.5 Controller selection
Program 1 activated
Ill. 8.6 Detailed overview
Volume flow sensor applied
Flushing valve applied
Time control activated
"L" Leakage