33
Chapter 4 – Installation Programming
NOTICE TO USERS, INSTALLERS, AUTHORITIES HAVING JURISDICTION, AND OTHER INVOLVED PARTIES.
This product incorporates field-programmable software. In order for the product to comply with the requirements in the
Standard for Control Units and Accessories for Fire Alarm Systems, UL 864, certain programming features or options must be
limited to specific values or not used at all as indicated below.
Program feature or option
Permitted in UL 864? (Y/N)
Possible settings
Settings permitted in UL 864
AC Delay
Y
2 hours and no delay
1-3 hours
The S/FDACT programmer is a Windows PC application,
SFDPrgmr.exe
, to configure an SDACT or
FDACT for use. The S/FDACT programmer is compatible with Windows XP, Windows 2000, Windows
NT, and Windows 98. In many cases, the factory default settings for your S/FDACT will be used, but at a
minimum you must program the telephone numbers of the intended receiving stations. You’ll probably
also want to change the account numbers from their factory defaults. Please refer to the figure below for
the feature descriptions that follow.
Set Event Codes
These tabs are used to set the SIA event codes which will be transmitted by the S/FDACT. The ‘Use
Default Event Codes:’ box is checked by default. This sets all programmable event codes to their factory
