5
Learn and remember the correct working method. Beginners should always keep a low speed,
use extreme caution before routine and product knowledge is achieved. The user/customer is
responsible to handle the situation correctly. The product should not be taken into use unless
it can be done in a safe way for the user.
•
Ensure that all nuts, bolts and fittings are securely attached, that all packing / shipping
supplies such as tape, steel tape, rope, etc. are removed.
•
Check that the reinforcing bars are not broken, replace if necessary.
•
Lubricate the tower rim thoroughly with grease before the blade mounted.
•
Turn and check that everything is clear before the cylinder is mounted.
Warn
ing!
Never use equipment or products that have defective safety components.
OPERATION
Only people who understand the safety information and operating instructions to operate
this equipment or product. Be alert and cautious while working with the tool or product,
and use only the tool or product in the manner described in the manual. When working with
equipment that has moving parts, there is always the risk of injury. Be careful when working
with equipment equipped with hydraulic hoses ,oil under pressure can penetrate the skin.
Seek medical attention immediately if this occurs.
Always work alone with the tools that are defined as single porpose tools. Respect the equip-
ment’s danger zone.Reduce speed when working on slopes and uneven terrain.
CONNECTING THE MACHINE
• Connect the implement to the tractor’s rear three-point hitch.
• Do not forget to install all the safety pins.
•
Dozer blade with hydraulic steering - connect the hydraulic hoses to the tractor’s
hydraulic outlet.
•
Ready for use.
Be careful when connecting the blade onto the tractor. Always keep an eye over the tractors
working area during all work with the blade. During operation, pay particular attention so that
the blade do not hit any external obstacles, especially when swinging the blade. Before leav-
ing the tractor cabin, lower the dozer blade on the ground.
Warn
ing!
Compliance with the safety instructions requires that the product is only used
as described in these instructions. It is the user’s responsibility to read through
the instructions and comply with them.
AFTER USE
Parking is not allowed with the equipment above ground, only with the equipment resting on
the ground. Rinse the implement if necessary.
