6
TRANSPORTATION AND STORAGE
Make sure there are no people, children and foreign objects around the area before transport-
ing the machine.Always take an extra caution during the transport.Ensure that the product
is well secured and that transport brackets are mounted.Always place the load as low as pos-
sible.Respect the danger zone even during transport.When lifting the equipment,never go
underneath suspended loads.Trailer used for transport should have working brakes.Always
store the machine in a dry place preferably underneath a cover when not in use. Ensure that
the product is stable and not likely to tip over. Never let children play where the machine is
being stored. Always keep in mind the risk of tipping!
MAINTENANCE AND SERVICE
Make sure the product is stable and not likely to tip over during maintenance and service.
Replace damaged and worn parts immediately to reduce the risk of damage. Perform main-
tenance, servicing and inspections as recommended. Use only parts with equivalent perfor-
mance to reduce the risk of damage and failure. All repairs and connections with electricity
must be performed by an authorized person. Always follow the safety regulations according
to maintenance schedule. Especially pay attention to the safety of knives, danger occur if they
come loose during operation.
•
Regularly check the condition of the product before the failure is a fact. Discovered
cracks, twisting, bending, glitches or fatigue stop work and rectify the fault. Worn parts
should be replaced.
•
Re-tighten all nuts and bolts after a few hours of driving.
•
Disconnect the equipment from the tractor when the fault remedied.
•
Check all nuts and bolts are tightened after performning maintenance and service.
Always test the machine before using it.
•
Lubricate all lubrication points regularly.
For spare parts: Contact Kellfri Service
RECYCLING
Disposal of the product, disassemble and transport to the municipality’s recycling station.
Contact your local authority for further information.
Warning!
To avoid mechanical damage to the blade, always have in mind that when driving with
the blade turned from the tractor (reversing the tractor), the blade does not have the
ability to go over obstacles and unevenness compared to when the blade is turned to-
wards the tractor.Some dozer blade is possible to side shift and to change the angle of
the blade.This is done by adjusting the position of pin that holds the blade and boom
angle. The dozer blade is intended to be used on gravel or tarmac. Max speed: 20 km/h