10
A. Mount the wheel (4) in the suspension
(8) with the bolt (18) and it’s M20 nut and
washer. Put a sleeve (27) on either side of
the wheel on the inside of the fork in the
suspension to distance the wheel from the
fork. Tighten the nut so that the wheel is
tight and still spinns freely. Repeat on other
side.
B. Mount the suspension with the wheel
on the wheel bracket (3) with M20 nut and
washer. Repeat on other side.
C. Mount the suspension on the blade (1)
with the L-sprints and secure it with a R-clip.
Repeat on other side.
D. Mount the adjustment rod (12) with the
long joint-pin in the blade and M16x80 bolt,
washer and nut in the suspension. Put the
M12x250 with washer and locking nut thru
the adjustment rod as a handle. Don’t for-
get to tighten the locknut when setting the
height with the
adjusment rod.