Model 6487 Reference Manual
SCPI Reference Tables
14-11
:SOURce[1]
:VOLTage
:SWEep
Sweep commands:
:STARt <NRf>
Program start voltage: -505V to 505V.
0V
:STARt?
Query start voltage.
:STOP <NRf>
Program stop voltage: -505V to 505V.
10V
:STOP?
Query stop voltage.
:STEP <NRf>
Program step voltage: -505V to 505V.
1V
:STEP?
Query step voltage.
:CENTer <NRf>
Program center voltage: -505V to 505V.
5V
:CENTer?
Query center voltage.
:SPAN <NRf>
Program span voltage: -505V to 505V.
10V
:SPAN?
Query span voltage.
:DELay <NRf>
Set delay: 0 to 999.9999s.
1s
:DELay?
Query delay.
:INITiate
Arm sweep, put source in operate.
:ABORt
Abort sweep, put source in standby.
:STATe?
Query if sweep running: 1 = sweep in
progress.
:SOURce2
Path to control Digital I/O port:
:TTL
Set I/O port value directly:
[:LEVel] <NRf> or
<NDN>
Specify 4-bit Digital I/O pattern (0 to 15).
15
(see
note)
[:LEVel]?
Query output value.
:CLEar
Clear I/O port (return output to TTL value).
[:IMMediate]
Clear I/O port immediately.
:AUTO <b>
Enable or disable auto-clear.
OFF
SOURce2 parameter values:
<NRf> =
0 to 15 Decimal format
<NDN> =
#Bxxxx Binary format (each x = 1 or 0)
=
#Hx
Hexadecimal format (x = 0 to F)
=
#Qxx
Octal format (x = 0 to 17)
Table 14-5 (cont.)
SOURce command summary
Command
Description
Default
parameter
Ref.
Section SCPI
Содержание 6487
