background image

        

vi 

 

 

    

DOC06179  Rev. B

OWNER / OPERATOR MANUAL

RUNNING FLOOR II

®

 DX / DXE

One Year Limited Non-Hydraulic Component Warranty

KEITH Manufacturing Co.

hereby warrants, only to the first owner of a new 

KEITH

®

Drive system

from the factory or 

selling distributor that the product (for non-hydraulic components only, such as electrical components, drive frame, cross 

drives, floor shoes, flooring and components from other suppliers) shall be free from defects in material and workmanship 

for a period of 

one year 

after delivery or sale to the first registered owner. 

Definition of Normal Use and Service:

Normal use and service means the loading and/or unloading of uniformly 

distributed, non-corrosive material, properly restrained and secured, on properly maintained public roads, with gross 

vehicle weights not in excess of factory rated capacity. For stationary installations, normal use and service means the 

conveying of uniformly distributed, noncorrosive materials, with weights not in excess of factory rated capacity. 

Sole and Exclusive Remedy: 

If the product covered hereby fails to conform to the above stated warranty, 

KEITH 

Manufacturing Co.’s

sole liability under this warranty and the owner’s sole and exclusive remedy is limited to repair or 

replacement of the defective part(s) at a facility authorized by 

KEITH Manufacturing Co.

This is the owner’s sole and 

exclusive remedy for all contract claims, and all tort claims including those based on the strict liability in tort and 

negligence. Any defective part(s) must be shipped freight prepaid to the nearest 

KEITH North America/South America 

facility or nearest 

KEITH Europe 

facility. Please contact KEITH for additional information on proper locations. 

Except As Expressly Set Forth Above, KEITH Manufacturing Co. Makes No Warranties: 

Express, implied or statutory, specifically: No warranties of fitness for a particular purpose or warranties of merchantability 

are made. Further, 

KEITH Manufacturing Co.

will not be liable for incidental damages or consequential damages such 

as, but not limited to, loss of use of the product, damage to the product, towing expenses, attorney’s fees and the liability 

you may have in respect to any other reason. 

Tort Disclaimer: KEITH Manufacturing Co.

shall not have any liability in tort with respect to the products, including any 

liability based on strict liability in tort and negligence. 

If This Warranty Violates Law: 

To the extent any provision of this warranty, contravenes the law of any jurisdiction, that 

provision shall be inapplicable in such jurisdiction and the remainder of the warranty shall not be affected thereby. 

Warranty Return Policy

1.) Contact 

KEITH Manufacturing Co.

at 1-800-547-6161 or [email protected] for a “Returned Goods 

Authorization” (RGA) number before returning any item for repair or replacement. The following information is needed 

to ensure parts are returned as quickly as possible. 

a. Company name 

e. Part number

b. Contact name

f. Quantity

c. Address 

g. Reason for return

d. Phone number

h. Customer’s account number

2.) Prior approval and a RGA number is needed when returning any unused product for credit. Make sure the RGA 

number is on the outside of the shipping carton and all paperwork is included. Return all material on a Freight Prepaid 

Basis. 

Revision Date April 2017

DOC06222   Rev. A

Содержание KRFII-3













































Отзывы: