1
DOC06179 Rev. B
OWNER / OPERATOR MANUAL
RUNNING FLOOR II
®
DX / DXE
1.0
Safety
1.1 General Safety
1.1.1 Intended Function and Expected Use:
1.1.1.1. The KEITH
®
RUNNING FLOOR II
®
DX/DX-Europe system is a reciprocating slat
conveyor primarily intended to load, hold, or unload bulk materials. It can also handle
unit loads such as pallets by using special handling techniques and possibly additional
safety controls. The system is supplied as a kit primarily intended for installation into
mobile trailers or truck bodies. The floor is often loaded through an open trailer top
or through the rear doors. The floor typically discharges material out the rear door. It
is hydraulically actuated, powered by a pump mounted either to a PTO or an electric
motor. The basic system is controlled by mechanically-actuated valves, but has the
option for electrically-actuated valves. The system is compatible with options and
accessories to improve performance. For example, it can be electrically controlled
by hardwired switches or a wireless remote. A CleenSweep® device can improve
clean out. Floor slat styles are selected based on the materials to be conveyed. The
standard system handles a wide array of materials in a non-hazardous, non-explosive
environment. Special modifications may be required for special environments like food-
grade applications or explosive conditions.
1.1.2 Improper Use
1.1.2.1. This equipment has been manufactured in accordance with state-of-the-art technology
and the acknowledged safety regulations. Nevertheless, dangerous situations could
arise from improper use, which could endanger life and limbs of personnel and cause
severe damage to the equipment and other assets. This equipment may only be used
for its intended purpose. It may only be operated in impeccable technical condition and
in accordance with the proper use and this user manual. Problems, which could affect
safety, must be resolved immediately. The manufacturer is not liable for any damage
caused by improper use or arbitrary modifications. The installation, commissioning,
operation, and maintenance instructions must be followed as outlined in this manual.
1.1.2.2.
Personnel must not enter the danger zone(s) when the system is enabled. Specifically,
nobody should be inside, under, or behind the trailer in the unloading zone during
operation. Additionally, no one should be in a full or filling trailer. Lock-out and tag-out
procedures must be followed before accessing the drive area.
1.1.2.3.
The maximum load capacity must not be exceeded. (See Specifications section)
1.1.2.4.
The hydraulic power source must not exceed the pressure and flow ratings. Install a
relief valve to ensure the maximum pressure is not exceeded.
1.1.2.5. Control circuitry must not be altered or bypassed.
1.1.2.6. Safeguards must not be altered or bypassed.
1.1.2.7.
The floor structure must not be altered.
1.1.2.8.
The floor should not be used to handle any material other than specified.
1.1.2.9. The user and system designer must understand the characteristics and safe handling
requirements of the material that is being conveyed.
Содержание KRFII-3
