Keith McMillen Instruments K-MIX, Руководство пользователя

Страница: 63 / 156

K-M
IX
H
ARDWARE
52
3. Tap the top of the same fader to solo the channel.
4. Steps 2 and 3 can also be done in reverse order.
V
ISUAL
F
EEDBACK
When a channel is both muted and soloed, the channel select button will blink yellow.
4.2.7.6 – S
TEREO
P
AIRING
K-Mix channels 1 and 2, 3 and 4, 5 and 6, and/or 7 and 8 can be paired into stereo channels . Once
paired, their parameters sync up and follow each other if any of them are adjusted. To enable stereo
pairing for one of the pairs:
1. Press and hold the [SHIFT] button.
2. Press anywhere on a rotary above the two channels you wish to pair (rotary 1 for channels 1 and 2,
rotary 2 for channels 3 and 4, etc.).
4.2.7.7 – [SHIFT] F
UNCTIONALITY
When in Mains Mode, the [SHIFT] button is used for muting and soloing audio channels and for
enabling or disabling stereo pairs.
• Hold down the [SHIFT] button and tap the bottom of a fader to mute the selected channel.
• Hold down the [SHIFT] button and tap the top of a fader to solo the selected channel.
• Hold down the [SHIFT] button and tap a rotary to pair the two channels directly below the rotary.