Keith McMillen Instruments K-MIX Скачать руководство пользователя страница 138

Страница: 138 / 156

K-M

DITOR

127

5.4.2.5 – I

MPORT

LOBAL

APPINGS

Imports a .kmixglobalmap file to the editor.

•

After selecting a file, the editor’s current MIDI, Surround, USB, and Preferences settings will be

replaced by the settings specified in the .kmixglobalmap file.

• Importing global mappings while a K-Mix is connected to the editor will also update the MIDI,

Surround, USB, and Preferences settings on the mixer itself. They will not be stored/saved on the

mixer, they will just be updated; you must manually save them to the mixer by either clicking a

Save Globals button

, or by powering your K-Mix down by holding the [ ] button for three seconds.

5.4.3 – E

DIT

The Edit menu contains the following options:

5.4.3.1 – C

OPY

RESET

Copies the current preset settings to the clipboard.
This only affects parameters that are stored per preset. It does not

affect global parameters, such as the MIDI, Surround, and USB

settings.

5.4.3.2 – P

ASTE

RESET

Pastes a copied preset into the currently selected preset.

• After pasting, the preset will not be saved. This allows you to

revert the changes if you change your mind or happened to paste by accident. You must explicitly

click the SAVE button for the changes to be made permanent.

This only affects parameters that are stored per preset. It does not affect global parameters, such as the

MIDI, Surround, and USB settings.

5.4.3.3 – P

ASTE

RESET

Pastes a copied preset into a brand new preset.

• This is essentially the same thing as the

Save As

function, but without the need to enter a preset

name.

• The newly created preset will have the same name as the original copied preset with “copy1”

appended to the name.

This only affects parameters that are stored per preset. It does not affect global parameters, such as the

MIDI, Surround, and USB settings.

5.4.3.4 – C

OPY

HANNEL

Copies the channel strip settings of the currently selected channel. This can be used to paste the same

settings to other channels.

• All channel strip settings are copied, as well as that channel’s reverb send level.

Reset Preset To Default
Reset Globals To Default

Copy Preset
Paste Preset
Paste Preset To New

Auto Populate Setlist

Start Dictation
Emoji & Symbols

Space

⌘

Edit

Содержание K-MIX





























































































































































Результаты поиска

Содержание K-MIX

Отзывы:

Похожие инструкции для K-MIX

Бренды по названию

Популярные бренды

Keith McMillen Instruments K-MIX, Руководство пользователя

Результаты поиска

Содержание K-MIX

Отзывы:

Похожие инструкции для K-MIX

Бренды по названию

Популярные бренды