2
INTRODUCTION AND SAFETY, continued
SAFETY PRECAUTIONS
1.
Do not set up or operate the
BenchMark
until you have read and understand this
manual and/or have been properly trained on its use.
Improper setup or misuse of the
BenchMark
may cause damage to the vial
being crimped, including breakage of glass that may cause injury.
2.
Review and follow all warning labels on the
BenchMark
to avoid injury and damage to
the device.
3.
Always wear impact resistant safety glasses and protective gloves while setting up or
operating the
BenchMark
, due to the possibility of glass breakage.
4.
Do not set any objects on the
BenchMark
, other than the appropriate accessories
installed according to this manual. Any other objects set on the crimper base may
interfere with the crimp cycle and cause damage.
5.
Keep hands and fingers clear of the head jaws when the crimp lever is pulled forward to
avoid being pinched.
6.
When returning to the
BenchMark
after an absence, always recheck the setup. The
device may have been used and not reset correctly, knocked out of adjustment, or
tampered with.
7.
Do not attempt to set up or operate the
BenchMark
if you suspect the device is
damaged or defective.
8.
Contact Customer Service if you have any questions or concerns regarding the safe and
proper setup or operation of the
BenchMark
.
Kebby Industries, Inc.
Customer Service
(815) 963-1466
