8
INITIAL SETUP INSTRUCTIONS, continued
STEP 4
–
Raise the Crimper Body for setup clearance.
A.
Loosen both Height Lock Handles (A)
by less than 1 turn.
B.
Place an empty vial on the Rubber
Pad of the Vial Holder (B).
C.
Turn the Height Adjustment Dial (C)
clockwise to raise the Crimper Body
until there is approximately 2 inches
of clearance between the bottom of
the Head and the top of the vial.
WARNING:
There is risk of pinching hands or fingers during the setup process if there is
not enough clearance between the Head and Vial Holder.
A
C
B
