background image

KC-P30 x-series

Functions

Configuration manual V4.09

29

© KEBA

5

Functions

The following chapters describe special functions of the charging station.

5.1

Load management in the local charging network

Load management in a local charging network allows multiple KeContact
charging stations to operate on a common supply. The maximum power al-
lowed by the supply line is divided by the master charging station.

Information

Charging at a slave charging station is only possible if there is a connection
to the master charging station. This prevents overloading of the connection.

5.1.1

Equal allocation mode

If the parallel active charging stations in a local charging network request
more power than the power supply provides (set maximum current), the
available charging current is divided evenly across all charging sessions.

Charging current per charging station = set maximum current per
phase / number of active charging sessions on this phase

If insufficient power is available for an additional charging process in the
charging network (set minimum current is underrun), the new charging
process will be lined up. Every 15 minutes, an active charging session is
paused in sequence, lined up at the back of the line, and the next charging
session in the line continues.

5.1.2

Current limiting

The current limiting for the charging station can be regulated in various
ways.

Setting by means of DIP switches locally on each charging station

Specification by master charging station

Specification via UDP connection

Reading out an external meter using Modbus TCP

If a current limit is specified via several different types, then the lowest preset
value is used for the currently valid current limit.

5.1.3

Phase-related load management

Phase-related load management is used for a charging network with charg-
ing stations with a 3-phase connection.

Содержание KeContact X Series











































Отзывы: