Keba KeContact X Series, Руководство по настройке

Страница: 32 / 42

KC-P30 x-series Functions
Configuration manual V4.09
32
© KEBA
Managing RFID cards at the RFID reader
Both the master RFID card and all slave RFID cards can be taught in directly
at the RFID reader of the charging station. To teach in an RFID card, no
charging session may be active and no vehicle may be plugged into the
charging station.
Teaching in a master RFID card
To access the "Service button", the housing cover and the connection panel
cover must be removed.
1) Press and hold the "Service button" in the connection panel until the
second signal tone is sounded (approx. 10s).
The charging station will then automatically perform a restart, deleting all
previously taught-in RFID cards, if necessary.
2) The charging station will be available again after 30 seconds.
3) After the waiting time, the first three segments of the led bar are illumi-
nated. A master RFID card can be taught in for 30 seconds by holding it
in front of the RFID reader.
A successful teach-in process is confirmed by a rising tone sequence.
Teaching in a slave RFID card
1) Hold the master RFID card in front of the RFID reader and wait for the
rising tone sequence.
2) Then hold the slave RFID card to be programmed in front of the RFID
reader within 10 seconds and wait for the signal tone.
3) Confirm the teach-in process by holding up the master RFID card again
within 5 seconds.
A successful teach-in process is confirmed by a rising tone sequence.
Managing RFID cards in the web interface
RFID cards can be managed via the configuration in the web interface. The
following functions are available:
● Teaching-in, editing or deleting an RFID card
● Exporting or importing a list of stored RFID cards as
*.csv
file
Information
It is recommended to use a text editor for editing the *.csv file. Otherwise
the date can be interpreted incorrectly upon import.
The following entries can be made during teaching-in and editing of an RFID
card:
Entry Description
RFID Card –
Serial No. (UID)
Serial number (UID) of the RFID card.
Expiry Date Date up to which the RFID card is to be valid.