KEB combivert R6-S, Руководство по применению

Страница: 52 / 168

Page 3.2 - 8 COMBIVERT R6-S © KEB, 2008-02
Operating and appliance data
Parameter Addr. R PG E Min. value Max. value Res. [?] Default
ru.23 Output condition state 0217h ro - - 0 255 1 - -
With parameters do 00...do.07 switching conditions can be selected, that serve as base for setting the out-
puts. This parameter indicates which of the selected switching conditions are met before they are linked or
inverted by programmable logic (also see chapt. 3.3. „Digital outputs“). According to following table a speci-
fic decimal value is given out for the switching conditions. If several of the selected switching conditions are
met, the sum of the decimal values is indicated.
Bit Decimal value Output
0 1 switching condition 0 (do.00)
1 2 Switching condition 1 (do.01)
2 4 Switching condition 2 (do.02)
3 8 Switching condition 3 (do.03)
4 16 Switching condition 4 (do.04)
5 32 Switching condition 5 (do.05)
6 64 Switching condition 6 (do.06)
7 128 Switching condition 7 (do.07)
Parameter Addr. R PG E Min. value Max. value Res. [?] Default
ru.24 State of output flags 0218h ro - - 0 255 1 - -
Display of the output flags after logic step 1. The selected switching conditions are linked in logic step 1
(do.8...24) and indicated here (see chapt. 3.3 „Digital outputs“). According to following table a specific deci -
mal value is given out for any output flags. If several output flags are set, the sum of the decimal values is
indicated.
Bit Decimal value Output
0 1 Flag 0
1 2 Flag 1
2 4 Flag 2
3 8 Flag 3
4 16 Flag 4
5 32 Flag 5
6 64 Flag 6
7 128 Flag 7