KEB COMBIVERT F6, Инструкция по эксплуатации

Страница: 22 / 48

4 | Connection of the control KEB Automation KG
22 ma_dr_f6-cu-p-inst-20182705_en
Terminals X2A.22 analog output
X2A.21 reference potential
Classification DIN EN 61131-2
Voltage output DC 0.0…10 V (corresponds to 0…100 %
output value)
Minimum load impedance 1 kΩ
Notes In the range up to 0.1 V the output value
is not linear to the output voltage.
Connection
Connection of the analog output ANOUT
21
22
U
DC
=0,0…10 V
Z
min
=1 kΩ
4.2.6 Voltage supply
4.2.6.1 Voltage input
The control board is supplied
• externally by a central 24V supply.
• internally, by its own switching power supply.
• in mixed operation, by external and internal supply.
To select a suitable voltage source, the maximum current consumption must al-
ways be determined.
4.2.6.1.1 Determination of the current consumption
The input P24Vin (X2A.28) supplies following components:
• Control (control board with safety module)
• Brake
• HCT
• Encoder
Consumer Current consumption
Control 0.6 A
Power unit Housing 2 / 3 / 4 0 A
Housing 6 0.6 A
Housing 7 / 8 / 9 1.0 A
Consumer Brake Max. 2.0 A
Encoder Max. 0.5 A
Digital output DO1 Max. 0.1 A
Digital output DO2 Max. 0.1 A
Voltage output 24Vout Max. 0.1 A
Sum DO safety module Max. 0.4 A
Tab. 10: Calculation the current consumption