General Safety Instructions | 2
ma_dr_f6-cu-p-inst-20182705_en
11
2.2 Start-up and operation
The start-up (i.e. the starting of normal operation) is prohibited until the machinery
has been proved to conform to the provisions
must be observed.
WARNUNG
Wrong parameterization
Unintentional behaviour of the drive
ü
During initial start-up or replacement of the drive controller
a) Secure motors against automatic restart.
b) Check whether the appropriate parameter list for the application has been im-
ported.
WARNUNG
Software protection functions as sole protection.
Protection function in case of software problems without function.
ü
Securing a unit solely with software-supported functions is not sufficient.
a) Install external protective measures (e.g. limit switch) that are independent of
the drive controller.
2.3 Maintenance
