KEB COMBIVERT 10F6 Series, Инструкция по эксплуатации

Страница: 26 / 84

3 Technical Data
Unless otherwise indicated, all electrical data in the following chapter refer to a 3-phase
AC mains.
3.1 Operating conditions
3.1.1 climatic environmental conditions
Storage Standard class Descriptions
Surrounding temperature EN 60721-3-1 1K4 -25…55 °C
Relative humidity EN 60721-3-1 1K3 5…95 % (without condensation)
Storage height – – Max. 3000 m above sea level
Transport Standard class Descriptions
Surrounding temperature EN 60721-3-2 2K3 -25…70 °C
Relative humidity EN 60721-3-2 2K3 95 % at 40 °C (without condensation)
Operation Standard class Descriptions
Surrounding temperature EN 60721-3-3 3K3 5…40 °C (extended to -10…45 °C)
Coolant inlet tem-
perature
Air – – 5…40 °C (-10…45 °C)
Liquid – – 5…40 °C
Relative humidity EN 60721-3-3 3K3 5…85 % (without condensation)
Version and degree of protection EN 60529 IP20
Protection against foreign material >
ø12.5 mm
No protection against water
Non-conductive pollution, occasional con-
densation when PDS is out of service.
Drive converter generally, except power con-
nections and fan unit (IPxxA)
Site altitude – –
Max. 2000 m above sea level
• With site altitudes over 1000 m a derat-
ing of 1 % per 100 m must be taken into
consideration.
• With site altitudes over 2000 m, the con-
trol board to the mains has only basic
isolation. Additional measures must be
taken when wiring the control.
Table 2: Climatic environmental conditions
26
OPerATING cONDITIONS