Phone
3
Enter the area code “212”.
If the area code starts with “0”, dial it without including the “0”
(There are some exceptions such as fixed-line phones in some
countries or regions including Italy and Moscow).
4
Enter the phone number of the other party
“123XXXX”
→
m
.
◎
You can also press
u
(Submenu)
→
[Add Prefix]
→
[International
call] to enter the country code when entering a phone number.
◎
The monthly limit fee is set for the au International Call Service.
The au International Call Service is unavailable from when the
limit fee is confirmed to be exceeded until the end of the same
month.
◎
Even if you cannot use the service by exceeding the limit fee,
you can use from the first day of the next month. Also, you can
use the domestic call as usual while the service is stopped.
◎
International call charges are billed together with monthly local
call charges.
◎
If you do not wish to use the service, you can set not to use the
au International Call Service.
For au International Call Service:
From au phones
157
(area code not required) (toll free)
From fixed-line phones
0077-7-111
(toll free)
Open 9:00 to 20:00 (everyday)
Receiving Calls
Answering an Incoming Call
1
When a call is arriving,
m
/
k
.
Press
o
(Silent) to stop the ringtone.
2
Talk
→
.
.
◎
If you are not subscribed to LTE NET or LTE NET for DATA,
disable “Data transmission” for “Mobile network settings” and set
“Network Mode” to “CDMA Home” before using the product.
◎
If a call arrives while using the address book, e-mail, etc., the call
is given priority and the function can be used again once the call
ends.
Putting an Arriving Call on Hold
1
When a call is arriving,
.
.
The call is put on hold, and audio guidance plays for the caller.
2
k
(Answer).
The call is taken off hold.
◎
You can also press
u
(Submenu)
→
[Hold answering] to put an
arriving call on hold.
◎
The call charges are charged on the other party who has made a
call to you while the call is put on hold as well.
◎
Pressing
.
while a call is on hold ends the call put on hold.
◎
If you disable the hold state once, you cannot put the call on hold
again.
◎
You can put the call on hold only when the product is used in
Japan.
53
