KCI V.A.C. ATS Скачать руководство пользователя страница 2

V.A.C.

 ATS Operations and Maintenance Manual 

 

i

 

 

Caution

 

 

Federal law restricts this device to sale or rental by or on the order of a physician. 

 

In order for KCI products to provide safe, reliable and proper performance, the 
following conditions must be adhered too. Failure to comply with these conditions 
will void any applicable warranties. 

 

 

Assembly, operations, extensions, re-adjustments, modifications, or repairs are 
carried out by qualified personnel authorized by KCI. 

 

 

The electrical installation of the room complies with the appropriate national 
electrical wiring standards. 

 

 

The equipment is used in accordance with the accompanying documentation and 
applicable labelling. 

 

 

Technical maintenance for the product is performed by qualified personnel 
authorized by KCI. 

 

Subject to confidentiality protections, satisfactory to KCI, KCI will make available 
upon request circuit wiring diagrams, component part lists, descriptions, calibration 
instructions, or other information which may assist the user’s appropriately qualified 
personnel to repair those parts of the equipment designated by the manufacturer as 
repairable. 

 

Although this equipment conforms to the intent of the directive 89/336/EEC in 
relation to Electromagnetic Compatibility, all electrical equipment may produce 
interference. If interference is suspected, move equipment from sensitive devices or 
contact the manufacturer. 

 

WARRANTY INFORMATION 

 

IN THE UNLIKELY EVENT OF A DEFECT IN MATERIALS OR 

WORKMANSHIP, A LOCAL KCI OFFICE, SUBSIDIARY OR AUTHORIZED 

AGENT WILL REPAIR, REPLACE OR SUPPLY REPLACEMENT PARTS 

UNDER STANDARD WARRANTY TERMS AND CONDITIONS IN EFFECT AT 

TIME OF PURCHASE. WARRANTY TERMS AND CONDITIONS ARE 

SUBJECT TO CHANGE AT ANYTIME WITHOUT NOTICE. WARRANTY 

TERMS AND CONDITIONS ARE IN LIEU OF ALL OTHER WARRANTIES 

EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY 

IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 

PARTICULAR PURPOSE. IN NO EVENT SHALL KCI BE LIABLE FOR 

CONSEQUENTIAL OR INCIDENTAL DAMAGES AND EXPENSES, 

INCLUDING DAMAGES TO PROPERTY, DUE IN WHOLE OR IN PART TO 

THE USE OF THE PRODUCT UNLESS OTHERWISE EXPRESSLY REQUIRED 

BY LAW. 

 

IN THE EVENT OF DEFECT, REPAIR WORK SHOULD BE COMPLETED BY 
RETURNING THE THERAPY UNIT TO A LOCAL KCI OFFICE, SUBSIDIARY 
OR AUTHORIZED AGENT. CONTACT KCI FOR YOUR NEAREST LOCATION.

 

Содержание V.A.C. ATS





































Отзывы: