FLUORESCENT TUBES UNDER THE BED PANE
Figure 33.1: Front unit lighting
Procedure
Fig.
1
Open the bed pane.
2
The tube is now accessible and can be
replaced.
33.1
FLUORESCENT TUBES ON THE REAR WALL
Figure 33.2: Rear unit lighting
Procedure
Fig.
1
The tube is located on the rear wall and is
easily accessible.
33.2
Filter pads
CLEANING CYCLE
The cooling air is sucked in via two dust fi lters. De-
pending on the location, clean the fi lter pads after
approx. 100 hour of operation, or replace them, if
necessary. Only use original fi lter pads for replace-
ment in order to ensure a troublefree operation.
FILTER PAD IN THE CANOPY SECTION
You can easily replace the fi lter pad installed on the
rear side of the canopy.
Figure 33.3: Filter pad in the canopy
FILTER PAD IN THE BASE SECTION
The fi lter pad is located behind the decorative lighting
in the base section. Open the bed pane and remove
the fl uorescent tube to get access to the fi lter pad.
Figure 33.4: Filter pad in the base section
O p e r a t i n g I n s t r u c t i o n s
|
mon amie
33
