PRESELECTING THE TYPE OF TANNING
Before starting the tanning session, you can
choose between a UV/collagen mix or a pure colla-
gen tanning session.
UV & Collagen
START
STOP
–
–
–
–
–
+
+
+
+
+
1
2
3
4
5
6
0
7
8
9
Only Collagen
START
STOP
–
–
–
–
–
+
+
+
+
+
1
2
3
4
5
6
0
7
8
9
ASSUMING THE TANNING POSITION
The canopy must be kept closed during the tanning
session in order to ensure the proper functioning of
the ventilation system.
1. Close the canopy and place yourself in the middle
of the device. Make sure that you are positioned
at an equal distance between your body and the
surrounding sunlamps.
2. Put on the protective goggles.
STARTING
To start the system during the warm-up time, press
the START button. After the set warm-up time
has elapsed, the tanning session will commence
automatically.
STOPPING
Keep the STOP button pressed for at least two
seconds. As an acknowledgement, you will hear a
sound signal, and the session-time display starts
fl ashing. The session is discontinued but the time
will continue to be counted. The tanning session can
be continued by pressing the START button if the
available session time has not elapsed yet.
After the time given by the timer has elapsed, the
session is terminated automatically, and the fan will
run on for three minutes.
Display in collagen tanning
mode
The following section shows the display and names
its operating elements available in the tanning mode.
Which of the operating elements are actually available
on your device depends both on the optional features
selected for your tanning system and on the settings
made in the service menu.
Display
START
STOP
–
–
–
–
–
+
+
+
+
+
1
2
3
4
5
6
0
7
8
9
Display of session time and of change
in volume and fan power
Back to previous/forward to next
display
Volume
Air-conditioning
UV-tubes on/off
Body fan
O p e r a t i n g I n s t r u c t i o n s
|
mon amie
16
