KBL beautyShaper, Руководство по эксплуатации

Страница: 8 / 48

O p e r a t i n g I n s t r u c t i o n s | KBL Tower beautyShaper
8
2.6 Environmental regulations
(disposal of lamps)
Fluorescent lamps contain fluorescent materials and
other waste products containing mercury. Some
areas of the USA and Canada have specific regu-
lations regarding disposal of these waste. Please
check the laws in your area and act in accordance
with municipal waste regulations. Please retain proof
of proper disposal of lamps. Your local regulatory
agency can assist you with the disposal of lamps.
Report the number of lamps to your local agency by
telephone or in writing. The regulatory agency can
provide you with a delivery point for your lamps or will
take care, in conjunction with a disposal company,
of the collection and proper disposal of the lamps
(Fees for this may apply). Please contact your code
enforcement officials for more information regard-
ing laws governing disposal of these components in
your area.
2.7 Service
REPAIRS - SERVICE - REPLACEMENT - PARTS
AND LAMPS - EYE PROTECTION - OPERATING
AND ASSEMBLY INSTRUCTIONS
If you are in need of any of the above mentioned
products or services, you should contact:
Laundries unlimited of Indiana, Inc.
dba Tanning Supplies unlimited.
1504 Sadlier Circle South Drive;
Indianapolis; IN 46239, U.S.A.
1-877-307-8434 (toll free) or 317-217-1700
ACCESSORY PARTS
Description KBL item no.
Protective eyewear 3010104000
2.8 Updating system software
Risk of damage by switching off the
power supply voltage.
Disconnecting power supply during the
update process, will lead to damage of
electronic components
.
• Make sure that the device is not dis-
connected from the power supply
voltage during the update.
To accomplish the update download the “USB-
Connect” software offered by KBL. For detailed
information press the help-button in the main menu.
2.9 Setup location
OPERATION IN MOBILE FACILITIES
CAUTION
Crushing hazard caused by sudden
movements
The device is unsuitable for operation in
mobile facilities (buses, trains, ships).
• The device must be adapted in order
to ensure trouble-free operation when
used in mobile facilities.
DANGER OF OVERHEATING BY OBSTRUCTION
OF THE AIRFLOW
Avoid in any case a change, obstruction or block-
age of the air inflow and outflow area to the device
or to make any unauthorized changes to the device.
The manufacturer shall bear no liability for damage or
injuries resulting from such actions.
• Comply with the ventilation information to avoid
serious system malfunctions.
• Only use OEM spare parts of the same type! The
use of other parts will void the manufacturer’s war-
ranty!
• Maintain the minimum distances from ceiling, bot-
tom and the walls! Dimensions are given in chapter
technical data.
Insufficient air supply leads to overheat-
ing which may result in damaging the
device!