KBL beautyShaper, Руководство по эксплуатации

Страница: 32 / 48

Part Application Cleaning and disinfection activities Interval
①
Handles
Directly on the
surface
Clean these parts with single-pass paper towels. Use
only EPA registered quaternary ammonium germicidal
based detergent solution (follow product label for use-
dilution), such as Lucasol One Step, to clean and disin-
fect the device and its components.
For thorough cleaning and disinfection, the product
must be allowed to remain in contact with the surface
being cleaned and disinfected for a specified amount
of time. This specified amount of time depends on the
cleaner/ disinfectant which is used. Follow the direc-
tions for use of the cleaner/disinfectant. After this speci-
fied application time remove remaining cleaner/disinfec-
tant from the surfaces of the device.
After each session
②
Control panel
③
Acrylic panes
Directly on the
surface
④
Protective goggle
⑤
Floor plate
Directly on the
surface
Tubes
Remove tubes and clean them with a damp chamois. 200 operating hours
Other plastic surfaces
and varnished surfaces Clean with a damp soapy cloth. Never clean with a dry
cloth.
When required
①
②
③
④
⑤
O p e r a t i n g I n s t r u c t i o n s | KBL Tower beautyShaper
32
CLEANING AND DISINFECTION PLAN