KBL beautyShaper, Руководство по эксплуатации

Страница: 34 / 48

10.3 Tools and aids
4
Hexagon socket screwdriver
Wrench sizes: 4mm
PH2
Standard Phillips screwdriver (PH2)
Suction cup
Number of qualified, trained and authorized service
technician required for this maintenance task.
The following chapters describe the work steps
required for carrying out maintenance and care
actions.
At the beginning of each chapter, the required tools
and aids are depicted, unless the corresponding
process can be carried out by one individual person
without any further auxiliary equipment.
The assembly is basically carried out in
reverse order of the disassembly.
Exceptions are specifically pointed out.
10.4 Acrylic panes
The acrylic panels used for the devices are made of
acrylic glass especially developed for this applica-
tion, as an easy-care, hygienic surface that is gentle
on the skin.
• The instructions for cleaning and care must be
observed!
• The outer surface can be cleaned without any pre-
paratory works.
The panes are cleaned from the inside
whenever necessary. When cleaning the
inside, it is recommended to clean also
the tubes.
REMOVING ACRYLIC PANES
Push the pane centrically towards the tubes (e.g.
with your elbow) and pull the upper right-hand cor-
ner of the pane out with the help of the suction cup.
Take hold of the pane from behind and release the
right-hand side in a downward movement. The pane
can then be removed.
O p e r a t i n g I n s t r u c t i o n s | KBL Tower beautyShaper
34