KBL 4800 alpha, Руководство по эксплуатации

Страница: 8 / 60

O p e r a t i n g I n s t r u c t i o n s | KBL 4800 alpha
8
2.7 Service
REPAIRS - SERVICE - REPLACEMENT - PARTS
AND LAMPS - EYE PROTECTION
If you are in need of any of the above mentioned
products or services, you should contact:
Laundries unlimited of Indiana, Inc.
dba Tanning Supplies unlimited.
1504 Sadlier Circle South Drive;
Indianapolis; IN 46239, U.S.A.
1-877-307-8434 (toll free) or 317-217-1700
NOTE: All repairs and replacement components
including, but not limited to protective eyewear,
lamps, timers and acrylic must be in compliance with
CFR 21 1040.20.
ACCESSORY PARTS
Description KBL item no.
Protective eyewear 3010104000
Headrest 3010212010
Technical documentation like operating and assem-
bly instructions as well as diagrams and original
spare parts can be provided by KBL.
2.8 Updating system software
Risk of damage by switching off the
power supply voltage.
Disconnecting power supply during the
update process, will lead to damage of
electronic components.
• Make sure that the tanning device is
not disconnected from the power sup-
ply voltage during the update.
To accomplish the update download the “USB-
Connect” software offered by KBL. For detailed
information press the help-button in the main menu.
2.9 Setup location
OPERATION IN MOBILE FACILITIES
CAUTION
Crushing hazard caused by sudden
movements
The tanning device is unsuitable for oper-
ation in mobile facilities (buses, trains,
ships).
• The tanning device must be adapted
in order to ensure trouble-free opera-
tion when used in mobile facilities.
DANGER OF OVERHEATING BY OBSTRUCTION
OF THE AIRFLOW
Avoid in any case a change, obstruction or block-
age of the air inflow and outflow area to the tanning
device or to make any unauthorized changes to the
tanning device. The manufacturer shall bear no liabil-
ity for damage or injuries resulting from such actions.
• Comply with the ventilation information to avoid
serious system malfunctions.
• Only use OEM spare parts of the same type! The
use of other parts will void the manufacturer’s war-
ranty!
• Maintain the minimum distances from ceiling, bot-
tom and the walls! Dimensions are given in chapter
technical data.
Insufficient air supply leads to overheat-
ing which may result in damaging the
tanning device!
EXPLOSIVE ATMOSPHERE
DANGER
Explosive atmosphere
Operation in explosive atmospheres can
cause explosions.
• Do not operate the tanning device in an
explosive atmosphere.