KBL 4800 alpha, Руководство по эксплуатации

Страница: 33 / 60

O p e r a t i n g I n s t r u c t i o n s | KBL 4800 alpha
33
Regular maintenance as shown in chapter
Maintenance intervals is required for the safe
operation of the tanning device and must be
documented.
- The current operating hours of the tanning device
and its parts requiring maintenance, may be dis-
played in the service menu. Please refer to chapter
“Service menu” in the assembly instructions.
- Cleaning and disinfection operations are carried
out in accordance with the cleaning and disinfec-
tion plan.
- Maintenance work may only be carried out by qual-
ified, trained and authorized service technicians.
- Do not reach behind covers and do not open the
tanning device with the device switched on.
• Use OEM spare parts of the same type
only! The use of other parts will void the
manufacturer’s warranty!
• In case of damage or injury proven to
be the result of the use of non-genuine
spare parts any liability is excluded.
• Replace UV-lamps only with the ones
that are characterized on the tanning
device. The use of other UV lamps will
void the operating license!
• Only use original KBL ballasts for CPI-
Energy tanning devices.
WARNING
Injuries and damage caused by
improper or insufficient maintenance
Maintenance and care play a major role for
the tanning devices performance and appear-
ance over its useful life. Diligent compliance
at the specified intervals is absolutely neces-
sary to ensure the proper operation of your
tanning device. Improper maintenance can
cause the tanning device to be damaged or
to become unusable. Always comply with the
specified maintenance intervals. Refer to the
following informations given in this chapter.
• Please note that the tanning device must
be inspected regularly by an authorized
KBL representative every 12 months
from the date of the last inspection to
maintain its proper condition.
• If the tanning device is in use for longer
than 10 years, it must be completely
overhauled by qualified, trained and
authorized service technicians.
• If the tanning device has not been used
for a longer period of time, then it must
first be inspected by qualified, trained
and authorized service technicians before
being put back into operation.
MAINTENANCE DOCUMENTATION
• Establish an accurate record-keeping system for
the maintenance reports.
• Ensure that all maintenance periods have been
fully complied with and documented as described
in chapter „Maintenance intervals“ in the operating
instructions.
10. Maintenance and cleaning