KBL 4800 alpha, Руководство по эксплуатации

Страница: 43 / 60

O p e r a t i n g I n s t r u c t i o n s | KBL 4800 alpha
43
10.7 Tubes
4
↵
By regularly cleaning the tubes you can help pre-
serve their tanning power.
• When installing the tubes, make sure that the
tube inscription is visible. If it is installed in
a different position, there will be no tanning
effect.
• After new tubes have been installed, the
operating hours of the tubes must be reset in
the service menu.
WARNING
Injuries and damage due to improper
maintenance
The share of harmful UVB radiation may
increase when the maintenance intervals
for the UV lamps are exceeded or
incompatible UV lamps are installed. As
a result sunburn and other skin damage
may occur.
• Always comply with the specified
maintenance intervals, see chapter
maintenance intervals / maintenance
plan.
• Follow the cleaning / disinfection
instructions.
REMOVING TUBE
90
0
ⓐ
ⓑ
TUBE REPLACEMENT IN THE BED PART
⑮
⇒
Open the bed pane.
⑮
If the tanning device is equipped with an air-
conditioning unit, remove the ducting pane.
⇒
Remove the tubes.
TUBE REPLACEMENT CANOPY PART
⇒
Tilt the canopy pane down.
⇒
Remove the tubes.
10.8 P2 Tubes
If your tanning device is equipped with P2 tubes,
maintenance and care intervals are equal to the
cycles for standard tubes.
Attention!
When installing / dismantling the P2 tubes,
pay attention to the middle holding clamp.