pag.
39
10 - ROUTINE MAINTENANCE
fig. 19
• Clean the net under a jet of hot water and then dry it accurately with
a dry cloth.
• Check if the glass is damaged; in this case, replace it.
• As soon as you notice a whitish layer on the metallic grid inside the
tube, it means that the tube has to be
replaced. Capacitor tube
usually happens every 18-24 months.
• Put again the metallic net on the tube by overlapping it to the internal
grid.
fig. 18
• Control that the small flap (L fig. 19) touches the metallic net and
presses on the quartz glass of the capacitor (C
fig. 19).
• Clean externally the equipment.
• Screw gently the quartz capacitor on its site.
• Insert again the capacitors in the hole of the box by putting the cover
near until it fully adheres to the site of the box.
• Fasten the fixation screws of the cover of the box.
• Reconnect to the electrical socket.
• Verify the working of the equipment. Now a light noise has to be
heard.
WARNING
Do not use cleansing agents, soaps or similar detergents
WARNING: keep absolutely a minimum distance of 6-7 mm
from the basis of the tube.
10.3 HALF-YEARLY CONTROLS
Periodical check on BIOX-DX
purifying system
It is periodically necessary to check the condenser cleaning. The frequency of the verification must be at least six
months, but always carried out when there is a decrease in the efficiency of the equipment.
To carry out the verification
and cleaning operations scrupulously follow
the following instructions.
• Switch off the equipment by taking out the plug from the electrical
socket.
• Remove the 4 fixation screws of the cover of the box (fig. 18).
• Remove the cover perpendicular to the plane of the box until the
quartz capacitors are out of the box.
• Place all on a flatbed.
• Gently unscrew the capacitor (C fig. 19).
• Remove the external net (R fig. 19) of the tube: if the operation results
to be difficult, rotate slightly the net around the
quartz capacitor.
• Clean the capacitor glass with a wet cloth.
Содержание KRE-1500DX1
