Kaysun KRE-1500DX1, Руководство по установке и обслуживанию

Страница: 17 / 48

7 - INSTALLATION AND START UP
min 600
A
B
Heat recovery extraction
Model A (mm) B (mm)
1500DX1
550 450
2300DX1
650 500
3100DX1
700 550
7.3 PRELIMINARY INFORMATION
• Work while meeting the current safety regulations, ensuring sufficient space to move and the cleanliness of jobsite.
• Wear protective clothing and personal protective equipment (glasses, gloves, etc.).
• Move the packed section as close as possible to the place of installation.
• Don't place tools or other jobsite equipment over the packed unit.
• Don't use the unit as a store of yard tools.
• Don't touch moving parts and don't use them as supports.
• Check the full integrity of all unit components.
7.4 INSTALLATION LOCATION
• Make sure that the support surface is able to support the weight of the unit(units) and will not cause vibrations.
• Make sure that the support surface is perfectly horizontal so as to Allow the correct coupling of the various
sections.
• Never position the unit in rooms where there are flammable gases
or acidic, aggressive or corrosive substances that may irreparably damage the various components.
• Leave a minimum amount of free space around the unit, as shown in the figure, so as to allow for installation,
maintenance and the replacement of components, such as coils, filters etc. (fig. 5).
• If the unit is hung from the ceiling all the sections that make up the air handling unit must be connected to the
ceiling.
fig. 5
pag. 17