Kaysun KRE-1500DX1, Руководство по установке и обслуживанию

Страница: 16 / 48

THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR THE FAILURE TO COMPLY WITH THE
SAFETY AND ACCIDENT-PREVENTION STANDARDS DESCRIBED BELOW.
IT ALSO DECLINES ALL LIABILITY FOR DAMAGE CAUSED BY IMPROPER USE OF THE UNIT AND/OR
MODIFICATIONS PERFORMED
WITHOUT AUTHORISATION.
SPECIALISED STAFF MUST PERFORM INSTALLATION.
7.2 SAFETY STANDARDS
7.1 DEFINITIONS
CUSTOMER - The customer is the person, the agency or the company who bought or rented the unit
USER / OPERATOR - The operator or user is the physical person who uses the unit for the purpose for which it was
designed
SPECIALISTIC STAFF - It is composed by the physical trained persons, able to recognize any danger due to the
proper and improper use of the unit and able to avoid or repair it inflammable or toxic gases at a high temperature.
• Wear suitable and accident-prevention clothing during installation, for example: goggles, gloves etc. as indicated
in the current regulation
• During installation operate in complete safety, clean environment and free from obstructions.
• Respect the laws in force, in the country in which the machine is installed, relative to use and disposal of
packaging and the products used for cleaning and maintenance of the machine, as well as complying with that
recommended by the producer of these products.
• Before starting the unit, check the perfect integrity of the various components of the entire plant.
• Do not touch moving parts or intervene between these.
• Do not perform maintenance and cleaning until the electric line has
been connected.
• The maintenance and replacement of damaged or worn parts must only be performed by specialised staff and
following the indications given in this manual.
• The spare parts must correspond to the requirements defined by the Manufacturer.
• If the unit must be dismantled, follow the envisioned anti-pollution standards.
N.B. When using the unit, the installer and user must consider and solve all risks connected to theplant.
For example, risks deriving from the entry of foreign bodies or risks due to the conveying of dangerous
inflammable or toxic gases at a high
temperature.
7 - INSTALLATION AND START UP
pag. 16