Kaysun KRE-1500DX1, Руководство по установке и обслуживанию

Страница: 15 / 48

6 - UNLOADING
THE FASTENING OF THE LOAD ON THE TRUCK IS THE RESPONSIBILITY OF THE CARRIER, AND
MUST BE PERFORMED, USING
STRAPS OR ROPES, SO AS TO AVOID DAMAGING THE PACKAGING
WHEN HANDLING THE UNITS, USE SUITABLE MEANS ACCORDING THE WEIGHTS INVOLVED.
THE MANUFACTURER DECLINES ALL LIABILITY FOR DAMAGE DERIVING FROM INCORRECT UNLOADING
OR INADEQUATE PROTECTION OF THE UNITS AGAINST THE ELEMENTS.
5- TRANSPORT
• The air handling units are packed in cardboard boxes that must remain intact until assembly.
• The components that, due to technical, constructional, transport or
ther requirements are not fitted on the unit, but
sent separately either inside the unit or otherwise, are specially protected and duly described on the packing list.
• No other material must be stacked on the products: the manufacturer declines all liability in the event of damage
deriving from such loads.
6.1 CHECKS UPON RECEIPT
When receiving the goods, before unloading, all the material delivered must be checked to ascertain the presence of any
damage caused during transport. Any damage found must be reported to the carrier, accepting the goods with
reservation and specifying the type of damage
on the delivery documents.
6.2 HOISTING AND HANDLING
It is strongly recommended :
• The weight of the units is shown on this manual.
• Avoid uncontrolled rotations.
• Place the goods down with care, avoiding sudden movements or,
worse, dropping the goods.
6.3 STORAGE
In the event of extended storage before installation, keep the units protected from dust and bad weather and away from
sources of vibrations
and heat.
pag. 15