Kaysun KMF-100 DVN4, Инженерный справочник

Страница: 139 / 140

Mini Amazon III Series
138
Ver. 2020-10
System Commissioning Report – Sheet D
Project name and location System name
Observed values
DSP1
content
Parameters displayed on DSP2 Remarks
Cooling
mode
Heating
mode
0.-- Operating frequency Actual value = value displayed
1.-- Operating mode Refer to Note 1
2.-- Operating fan speed level Refer to Note 2
3.-- Total capacity requirement of indoor units
4.-- Total capacity requirement for the modified ODU
5.-- T3 Condenser temperature(°C) Actual value = value displayed
6.-- T4 Outdoor ambient temperature(°C) Actual value = value displayed
7.-- T5 discharge temperature(°C) Actual value = value displayed
8.-- TF invert module Temperature(°C) Actual value = value displayed
9.-- TL refrigerant cooling tube temperature (°C) Actual value = value displayed
10.-- EXVA position Actual value = value displayed× 8
11.-- Actual current (A) Actual value = value displayed
12.-- Inverter compressor current (A) Actual value = value displayed
13.-- Actual voltage (V) Actual value = value displayed
14.-- DC bus voltage (V) Actual value = value displayed
15.-- Indoor heat exchanger pipe (T2/T2B) average temperature (°C) Actual value = value displayed
16.-- Total number of IDUs Actual value = value displayed
17.-- Number of Operating IDUs
18.-- Model
19.-- System address
ODU address in the centralized
control system
20.-- Priority mode Refer to Note 3
21.-- Version of the program
22.-- Most recent error or protection code
“nn“ is displayed if no error or
protection
events have occurred since start-up
23.-- Display “--”
Notes:
1. Operating mode:

0: standby; 2: cooling; 3: heating; 4: forced cooling.
2. The fan speed index is related to the fan speed in rpm and can take any integer value in the range 0 (0-off) to 8 (fastest).
3. Priority mode:

0: Automatic selection of priority mode; 1: cooling priority; 2: first ON priority; 3: heating only; 4: cooling only; 5: heating priority