Kaye Validator AVS, Руководство пользователя

Страница: 112 / 167

Chapter 10. Generating Reports
10.2 Report Types
10.2.1 Setup Report
The Setup Report documents sensor labels and definitions for each SIM, wiring locations, and
the parameters for sensor calibration, qualification and system preferences. Individual group
information includes the sensors assigned to that group, statistical, interval, lethality, and
saturated steam calculations, the event defined for that group, and group-specific information
such as vessel ID, SOP/protocol number, load description, asset details (if associated with a
report) and comments. Sensor calibration parameters can include high low and check set point,
Stability and Deviation criteria defined while creating the setup. Qualification parameters
include Start stop conditions, scan rate and data storage. For current, voltage and pressure
sensors, the report lists scaling information such as min and max of input and output. System
preferences such as temperature units, pressure units, and line frequency also appear. The
report header lists the date and time the report was printed, the setup name, your company
name, the firmware and software version numbers, the date this setup was saved, and identifies
the person who saved this setup.
The Setup Report can be generated independently or as part of the qualification study.
•
When you generate this report independent of the full study, you can use the Setup
Report to check your setup configuration and/or as a guide for wiring SIMs.
•
When you generate this report as part of the qualification study, the Kaye Validator serial
number and the serial numbers of the SIMs used in sensor calibration are documented. All
group-specific information such as vessel ID, SOP/protocol number, load description, and
comments appear exactly as they were used in the qualification study.
Kaye Validator User’s Manual
105