KaVo SURGmatic S201 C Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 28

KaVo SURGmatic S201 C Скачать руководство пользователя страница 21

Instructions for use SURGmatic S201 L - 1.009.0470 SURGmatic S201 C - 1.009.1100

7 Reprocessing steps in accordance with ISO 17664 | 7.5 Care products and systems - Servicing

KaVo recommends servicing the product as part of the reprocessing after each
use, i.e. after each cleaning, disinfection, and before each sterilisation.

▶

Remove the tool from the medical device.

▶

Service the product in the QUATTROcare PLUS.

See also:

2

Instructions for use KaVo QUATTROcare PLUS

Servicing the clamping chuck

KaVo recommends servicing the chuck system once a week using the chuck
servicing program integrated in the device.

Note

Handpieces must be taken off the service couplings before the chuck service
can be started and performed.

▶

Close the front door and press the chuck service button for at least three
seconds until the spray canister control LED flashes three times consecut-
ively.

ð

The device is in chuck service mode.

▶

Remove the service coupling of the chuck from the side hatch of the QUAT-
TROcare PLUS and attach it to coupling service point four, on the far right.
A MULTIflex adaptor must be mounted there.

▶

Press the handpiece together with the guide bush of the chuck to be ser-
viced against the tip of the service coupling.

▶

Press the button marked with the chuck service symbol.

Note

Close the chuck service mode.

Option 1: Place the dental handpieces in the QUATTROcare PLUS 2124 A,
close the front door and start theservice procedure.
Option 2: After three minutes with no service procedure running, the device
automatically switches back to normal service mode.

See also:

2

Servicing with KaVo QUATTROcare PLUS

7.5.3 Care with KaVo SPRAYrotor

Note

KaVo SPRAYrotor is no longer included in the current delivery pro-
gramme.

Follow-up product:

▶

QUATTROcare PLUS 2124 A

Note

Head can be serviced alone or attached to a shank.

21 / 28

«
...
19
20
21
22
23
...
»

Содержание SURGmatic S201 C





























Отзывы:

Нет отзывов