KaVo SURGmatic S201 C, Инструкция по эксплуатации

Страница: 14 / 28

Instructions for use SURGmatic S201 L - 1.009.0470 SURGmatic S201 C - 1.009.1100
5 Operation | 5.6 Removing the milling tool or diamond grinder
14 / 28
CAUTION
Danger of injury from cutters or grinders.
Infections or cuts.
▶ Wear gloves or finger stalls.
CAUTION
Hazard from defective chuck system.
The cutter or grinder could fall out and cause injury.
▶
Pull on the cutter or grinder to check that the chucking system is okay and
the cutter or grinder is securely held. Wear gloves or finger stalls when you
check, insert or remove the insert to prevent injury and infection.
▶
Insert the bur or diamond grinder into the segment of the head drive by
twisting the tool slightly, and push it to the end stop. Activate the pushbut-
ton if necessary.
▶
Check if the tool is seated securely by pulling on it.
5.6 Removing the milling tool or diamond grinder
WARNING
Hazard from rotating dental bur or diamond grinder.
Lacerations and damage to the chuck system.
▶ Do not touch the dental bur or diamond grinder when it is rotating!
▶ Do not press the push-button while the dental bur or diamond grinder is ro-
tating!
▶ Remove the dental bur/diamond grinder from the contra-angle handpiece
after treatment to avoid injury and infection when putting it away.
▶ After the dental bur or diamond grinder has stopped rotating, firmly press
the pushbutton with your thumb and simultaneously pull out the dental bur
or diamond grinder.