KaVo Scan eXam One Скачать руководство пользователя страница 58

Страница: 58 / 73

8 Other information

KaVo Scan eXam One

8.4 Disinfecting the unit

CAUTION:

Wear gloves and other protective clothing when

disinfecting the unit.

Wipe the unit with a cloth dampened with a suitable

disinfectant solution such as ethanol 96%. Never

use abrasive, corrosive or solvent disinfectants. All

surfaces must be dried before the unit is used.

WARNING:

Do not use any disinfecting sprays as the vapor

could ignite and cause injury.

Disinfecting techniques for both the unit and the

room where the unit is used must comply with all

local and national regulations and laws concerning

such equipment and its location.

8.5 Maintenance

The unit does not require any maintenance.

8.6 Repair

The unit does not require any maintenance. If the

unit is damaged or malfunctions in any way it must

only be repaired by service personnel authorized by

the manufacturer of the unit.

8.7 Disposal

At the end of the useful working life of the unit and/

or its accessories make sure that you follow

national and local regulations regarding the

disposal of the unit, its accessories, parts and

materials. The unit includes some or all of the

following parts that are made of or include

materials that are non-environmentally friendly or

hazardous:

•

electronic circuit boards

•

electronic components

•

imaging plates

Approved:

Reviewed: Jalkanen Joni 2017-02-13 16:00

Reviewed

See PDM system to determine the status of this document. Printed out: 2017-03-17 10:35:17

D510414, 5

Содержание Scan eXam One










































































Результаты поиска

Содержание Scan eXam One

Отзывы:

Похожие инструкции для Scan eXam One

Бренды по названию

Популярные бренды

KaVo Scan eXam One, Руководство пользователя

Результаты поиска

Содержание Scan eXam One

Отзывы:

Похожие инструкции для Scan eXam One

Бренды по названию

Популярные бренды